Alvarado CFG Installation And Maintenance Instructions Manual - Page 3
Browse online or download pdf Installation And Maintenance Instructions Manual for Fencing & Gates Alvarado CFG. Alvarado CFG 10 pages. Bi-directional waist high security gate
Print PageCSG/SSG/CFG Installation and Maintenance Instructions
Installation Tools
•
Hammer Drill
•
5/8" Concrete Drill Bit
•
Socket Wrench
•
9/16" Socket
•
Torque Wrench (ft-lbs.)
•
1/8" Allen Wrench
•
3/16" Allen Wrench
•
#2 Phillips Head Screwdriver
Parts List
This product is shipped with the required installation hardware. Make sure that none of these parts are missing
and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation
and contact Alvarado. If additional copies of installation instructions are required, please visit www.alvaradomfg.com.
Gate & Hinge Post
(CSG/SSG Shown)
Protective Pads (CFG Model Only)
(Qty 2)
Before You Begin
This installation manual is applicable to the following gate models: CSG, SSG, CFG. This manual focuses on the
CSG/SSG for the basis of instruction; however, most steps are identical across models. Any differences will be called
out as applicable.
CSG (Chrome Steel Gate)
SSG (Stainless Steel Gate)
Created on: 10/7/2013
©Alvarado Mfg. Co., Inc.
Directional Adapter
Bracket
Base Cover
For Assistance: [email protected] (909) 591-8431
•
Shop Vac
•
Tape Measure
•
Level
•
Chalk Line
•
Rubber Mallet
•
Pencil
•
Washer Shims
Also Included:
•
1/4"-28 x 1" Socket Cap Head Screws
(Qty 2)
•
1/4"-28 x 3/8" Flat Point Set Screws
(Qty 4)
Anchor Package (Optional)
•
3/8" Anchors (Qty 4)
•
3/8"-16 x 2 1/2" Hex Head Cap Screws
(Qty 4)
•
3/8" Flat Washers
(Qty 4)
CFG (Chrome Floor Gate)
Page 3
PUD3570R2-0