3M Digital Projector SX55 Quick Start Manual - Page 6

Browse online or download pdf Quick Start Manual for Projector 3M Digital Projector SX55. 3M Digital Projector SX55 11 pages. Quick start guide

3M Digital Projector SX55 Quick Start Manual
Connecting the power supply / Putting batteries into the remote control

Connecting the power supply

Connecting the power supply
WARNING ►Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in fi re and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to get a new one.
• Only plug the power cord into an outlet rated for use with the power cord's
specifi ed voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection of
the three-pronged plug.
1.
Connect the connector of the power cord to
the AC inlet of the projector.
Firmly plug the power cord plug into the
2.
outlet.

Putting batteries into the remote control

Putting batteries into the remote control
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fi re, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specifi ed. Do not use batteries of different
types at the same time. Do not mix a new battery with used ones.
• Make sure the plus and minus terminals are correctly aligned when loading.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fi re or water. Keep batteries in a dark, cool and dry play.
• If you observe leakage of a battery, wipe out the fl ower and then replace.
If the fl ower adheres to your body or clothes, rinse well with water immediately.
1.

Remove the battery cover.

Slide back and remove the battery cover in the direction of
the arrow.
I nsert the batteries.
2.
Align and insert the two AA batteries according to their plus
and minus terminals as indicated in the remote control.
Close the battery cover.
3.
Replace the battery cover in the direction of the arrow and
snap it back into place.
6
© 3M 2004
3M™ Digital Projector X45/SX55
Connector
of the power cord
AC inlet