AKO K 810 Operating Instructions Manual - Page 5
Browse online or download pdf Operating Instructions Manual for Heater AKO K 810. AKO K 810 6 pages.
Also for AKO K 810: Operating Instructions Manual (6 pages), Operating Instructions Manual (6 pages)
Print Page
Appliance faults and possible causes
The appliance does not warm up.
á
The plug is not connected to the mains power supply.
- Plug it in.
á
The rotary knob is set to the position 0.
Æ
- Turn the knob
to the required setting.
á
The thermostat is set too low.
Ç
- Turn the thermostat
á
The over-temperature protection has been activated, because the air intake or outlet is blocked.
- Let the appliance cool off for about 5 minutes.
- Make sure that the air intake and outlets are free and not blocked.
- The appliance re-starts automatically.
The fan does not work (only for K 820).
á
The fan switch is set to position 0.
È
- Turn the fan switch
to position
In the event that you have checked all of the above and the appliance still does not work, please contact your
local dealer or the AKO service centre.
Cleaning the appliance
If required, the appliance can be cleaned by wiping it over with a slightly damp cloth.
Maintenance
Depending on the amount of dust and dirt, we recommend that you have the appliance cleaned by qualified
personnel.
Disposal
For the safe and environmentally friendly disposal of the appliance, please refer to your dealer, or directly to
the manufacturer.
up higher.
.