DLS AMPLIFIER ONE Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Amplifier DLS AMPLIFIER ONE. DLS AMPLIFIER ONE 12 pages.
Also for DLS AMPLIFIER ONE: Datasheet (3 pages)

Print Page

1. Front Panel Controls

Operating

We recommend that you leave your AMPLIFIER ONE powered up at all times to maintain optimal

performance. If you plan to be away from your home for a few days, powering off the amplifier may

not be a bad idea. Don't forget, if you do so, it will require several hours before it reaches its peak

performance after you've powered up again!

Turning on your AMPLIFIER ONE for the first time

When you turn the amplifier on for the first time, make sure that every cable is properly connected

to avoid any problems. Then turn on your amplifier in the following manner:

Turn on the main switch labelled POWER to the position "ON" at the rear side.

Make sure you connect to the proper voltage marked on your amplifier.

You will now see WARMING UP in the display window, wait a few seconds until

the message disappear.

Press the "STANDBY" button on the front side, the display window will

now display the Source and

Select input line.

Adjust the Volume to a reasonable listening level.

The R4U remote control

Functions used to control AMPLIFIER ONE are shown below, all the other buttons are only used

to control CD ONE

WARMING UP in the display window, wait a few seconds until

WARMING UP

Source

Source and

Volume level.