3M Multimedia Projector MP8625 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Projector 3M Multimedia Projector MP8625. 3M Multimedia Projector MP8625 2 pages.

Print Page
3MP8625 Multimedia Projector Quick Setup Instructions
Project Packout
MP8625 Multimedia Projector
Power Cord
3-Conductor
110V - US
Video/Audio Cable
220 - UK, Europe
Packout Items Show Above:
• Projector
• VGA Cable
• Remote Control
• MAC Adaptor
• Power Cord
• Video Cable
• Video/Audio Cable
Remote Control Transmitter
STANDBY / ON button
Set main power switch to ON. Press and
hold STANDBY/ON button for projector
mode (lamp on) or standby mode (lamp off).
MAGNIFY buttons
Press +/- to magnify image (4x
magification). Press POSITION button and
use disc pad to view entire image. Press
OFF button to return to normal image size.
POSITION button
Press and light POSITION button.
Move DISC PAD to adjust horizontal/
vertical image position.
DISC PAD
Select mode, then move DISC PAD to
position image, navigate menus or control
mouse functions. To select the mode:
• Press and light POSITION button for
position mode.
• Press and light MENU ON button for
menu mode.
MENU ON button
Press and light MENU ON button to display
the Main Menu. Move DICS PAD to select
menu and/or adjust screen values.
BLANK ON button
Press BLANK to display a blank
background with no image. Press again to
return the image to the screen.
INPUT buttons
RGB 1/2: Select computer video input
(RGB1
RGB2
RGB1).
VIDEO 1/2: Select video inputs
(VIDEO1
VIDEO2
VIDEO1).
Remote Control Transmitter
(batteries included)
VGA Cable
MAC Adapter
(15-15 pin M/M)
with dip switch
(S-Video mini DIN4-pin)
Packout Items Shown Above:
• PS/2 Mouse Cable
• ADB Mouse Cable
• Serial Mouse Cable
• Stereo Mini-Jack
MUTE button
Press MUTE to switch the audio
LASER APERTURE
sound ON or OFF
VOLUME button
Press +/- to adjust internal/external speaker
volume.
LASER POINTER
STANDBY/ON
MUTE
Press and hold down button to project laser
pointer.
CAUTION
MAGNIFY
To prevent injury to eyesight, do not point
laser beam at other persons or look directly
VOLUME
into laser beam.
OFF
POSITION ON
LASER
LEFT MOUSE
button
Backside
of Remote
RESET
RIGHT
MENU ON
MOUSE ON
RESET / RIGHT MOUSE button
RESET: When a menu is being displayed,
BLANK
TIMER
press RESET to return menu value to factory
setting.
RIGHT MOUSE: When computer image is
RGB1/2
VIDEO1/2
being displayed, press for right mouse button
INPUT
function.
MOUSE ON button
Press MOUSE ON button to activate mouse
mode. Move DISK PAD to control mouse
functions.
TIMER ON / OFF button
Press TIMER to display and start the timer as
set in OPT menu setting. Note: Timer will not
display on a blank screen. To remove TIMER
display press again.
8625-14A

Projector Controls

RESET
MENU
MUTE
INPUT
ON
LAMP
TEMP
(B)
STANDBY/ON
Video Cable
8625-08A
Start Up Procedure
1. Make all cable connections and line hookups with power off.
2. Press the projector power switch (A) to the "ON" position.
3. Press the STANDBY/ON button (B).
4. Adjust the screen size by rotating the ZOOM CONTROL KNOB (C).
5. Adjust the focus (D) by rotating the projection lens.
6. Turn on all connected equipment.
7. Press the INPUT button (E) on the projector or INPUT SELECT (Video or
RGB) button on the remote to select signal source.
Shutdown Procedure
1. Press and hold STANDBY/ON button for 3-5 seconds.
(The lamp turns off, the fan motor continues to run)
Do not turn off the projector power before pressing the STANDBY/ON button.
The fan motor will run for about 1 minute and cool the projector.
2. After fan stops, press main power switch to "OFF".
3. Disconnect cables.
(E)
(D)
(C)
Caution
(A)
8625-11A