aion PLASMA VINTAGE DRIVE Manual - Page 4
Browse online or download pdf Manual for Music Pedal aion PLASMA VINTAGE DRIVE. aion PLASMA VINTAGE DRIVE 10 pages.
Print Page
PARTS LIST, CONT.
PART
VALUE
C14
100uF
C15
100n
D1
1N5817
Q1
2N5088
Q2
2N5088
Q3
2N5088
BASS
100kB
DRIVE
1kC
TREBLE 100kB
VOL.
100kA
LED
5mm
IN
1/4" stereo
OUT
1/4" mono
DC
2.1mm
BATT
Battery snap
FSW
3PDT
ENC
125B
PLASMA VINTAGE DRIVE
TYPE
Electrolytic capacitor, 6.3mm
MLCC capacitor, X7R
Schottky diode, DO-41
BJT transistor, NPN, TO-92
BJT transistor, NPN, TO-92
BJT transistor, NPN, TO-92
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
LED, 5mm, red diffused
1/4" phone jack, closed frame
1/4" phone jack, closed frame
DC jack, 2.1mm panel mount
9V battery snap
Stomp switch, 3PDT
Enclosure, die-cast aluminum
NOTES
Original units used BC109, BC169C, BC184C or BC184L. These are all
high-gain transistors (hFE 400+). 2N5088 is a suitable low-noise and
commonly-available replacement. See build notes for more info.
Original uses 10kB, but 1kC will provide a much more usable control.
Switchcraft 112BX or equivalent.
Switchcraft 111X or equivalent.
Mouser 163-4302-E or equivalent.
Optional. Use the soft plastic type—the hard-shell type will not fit.
Can also use a Hammond 1590N1.
4