aion EMBER Instructions Manual - Page 11

Browse online or download pdf Instructions Manual for Music Equipment aion EMBER. aion EMBER 14 pages.

Print Page

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
EMBER METAL DISTORTION
5mm LED
1590BBS
0.9"
ø3/8"
OUT
VOLUME
TONE
x: -1.35, y: +1.71
x: -0.45, y: +1.71
ø9/32"
ø9/32"
CUT
STYLE
x: -1.35
x: -0.675
y: +0.56
y: +0.56
ø1/4"
ø1/4"
CENTER (0,0)
LED
FOOTSWITCH
x: -0.775, y: -1.775
x: 0, y: -1.775
ø5/16"
bezel, available from several parts suppliers. Adjust
0.9"
ø3/8"
ø1/2"
IN
DC
TIGHT
GAIN
x: +0.45, y: +1.71
x: +1.35, y: +1.71
ø9/32"
ø9/32"
MIDS
BOOST
GATE
x: 0
x: +0.675
x: +1.35
y: +0.56
y: +0.56
y: +0.56
ø1/4"
ø1/4"
ø9/32"
ø15/32"
11