AKO AKO-59810 Instructions - Page 2

Browse online or download pdf Instructions for Measuring Instruments AKO AKO-59810. AKO AKO-59810 2 pages.
Also for AKO AKO-59810: Instructions (2 pages), Instruction Manual (2 pages)

AKO AKO-59810 Instructions
Activation of the device
Before activating the device, make sure that there is enough reception at the installation location. Activated
devices may not be returned.
1.-Access akonet.cloud or open the mobile application Akonet.app (requires registration).
2.-Register the new device by pressing
Ÿ
Manually enter the serial no. and the activation code that appear on the device's label.
Ÿ
Press
and capture the QR code of the device's label (requires that the PC or mobile device used for accessing
akonet.cloud has a camera).
3.-Once both steps have been completed, activate the device by pressing the pushbutton for 9 seconds. The 3 indicator lights
flash.
4.-Wait until the process has finished (approximately 3 min). If the green LED lights up, transmission is OK and the device has been
activated correctly. If the red LED lights up, transmission has failed. The device will make 2 more attempts in the course of 1 hour and
will try again once a day. If the problem persists, check coverage in your area or change the location of the device.
Operation
Pushbutton
Long press (> 9 sec.): Activate the initial start-up of the device. This should only be done after registering in akonet.cloud.
When activated, the 3 indicators flash and during transmission the blue indicator flashes.
Medium press (> 3 sec.): Forces data transmission to akonet.cloud. When it wakes up, the 3 indicators flash and during
transmission the blue indicator flashes.
Short press (< 3 sec.): Displays the status of the battery with the green indicator:
ON:
Battery OK
Flashing: Low battery, replace as soon as possible.
Indicators
Display the status of the device only after a medium press (forced transmission), the rest of the time they remain off.
RED
Flashing: An error has been detected in the operation, after 3 seconds the indicator turns off.
Constant: The transmission could not be carried out, review the coverage, after 3 seconds the indicator turns off.
GREEN
At the end of a transmission, it indicates the level of current coverage:
Constant: Good signal quality
Flashing: Medium signal quality
Flash: Poor signal quality
After 3 seconds the indicator turns off.
BLUE
Flashing: Transmission in progress
Logging and sending data
The device is shipped from the factory in an inactive state, therefore it does not transmit or log any information until it is activated (see "Registering the device").
Once active, the device logs the temperature, moisture, alarms and external probe temperature (depending on model) data at regular intervals. The time between each log is
defined by the option "L2 - Data logger interval frequency" under the heading "Parameters / dlG - Datalogger" of
The sending of logged data to akonet.cloud takes place when it meets one of the following criteria:
The elapsed time defined using the "Tx - Cloud transmission interval", defined in paragraph "Parameters / nb - Narrowband", has run out.
An alarm has been detected with forced transmission configuration.
A transmission has been forced with a medium press.
For more information on the operation of akonet.cloud and on how to configure the device, consult manuals 5000H001 and 5000H011 respectively. These are available on our
website
www.ako.com
.
Technical specifications
Power supply
...........................................................
Estimated life of the battery................................................................. up to 8 years*
Measuring range Internal temperature probe ........................................ -40 to 50 ºC
External temperature probe
Moisture
.....................................................................0 to 100 %
Resolution
Temperature .....................................................................0.1 ºC
Moisture.......................................................................0.1 % RH
Precision
Internal temperature probe
.....................................................................0 to 50 ºC:
External temperature probe
Moisture .....................................................20 to 80 % RH: 3 %
Rest: .............................................................................. 10 %
Working ambient temperature................................................................-40 to 50 ºC
Storage ambient temperature ................................-40 a 60 ºC, recommended +30 ºC
Range of moisture permitted .............................0 - 100 % RH (without condensation)
Protection degree AKO-59810x / 59820x......................................................IP68
AKO-59811x / 59821x
*Battery life may vary depending on the ambient temperature, the level of coverage and the configuration of the device.
and following one of these two methods:
Battery
LiSOCI2, 3.6 Vdc, 6.5 Ah
........................................-50 50 ºC
to
................................-40 to 0 ºC: 1 ºC
±
................................................ 1 ºC
±
......................................................IP65
Red: Operation
Pushbutton
akonet.cloud.
Bands .....................NBIoT (Narrow band) LTE Cat NB1 | B2, B3, B4, B8, B12, B13, B20
Band
2...............1930 MHz ~ 1990 MHz...............1850 MHz ~ 1910 MHz
3...............1805 MHz ~ 1880 MHz...............1710 MHz ~ 1785 MHz
4...............2110 MHz ~ 2155 MHz...............1710 MHz ~ 1755 MHz
8.................925 MHz ~ 960 MHz...................880 MHz ~ 915 MHz
12................729 MHz ~ 746 MHz...................699 MHz ~ 716 MHz
13................746 MHz ~ 756 MHz...................777 MHz ~ 787 MHz
±
20................791 MHz ~ 821 MHz...................832 MHz ~ 862 MHz
0.5 ºC
Maximum transmission power ...................................................23.5 dBm conducida
±
Antenna
AKO-59810x / 59820x
±
AKO-59811x / 59821x
Dimensions ......................................................107 mm (W) x 85 mm (H) x 39 mm (D)
www.akonet.cloud
Akonet.app
Mobile application available
Frequency Rx
..................................................Internal
..................................................External
>9"
for IOS and Android
Green: Battery /
Coverage
Blue: Transmission
Frequency Tx