BluDot DODU BED-TWIN Assembly Notes
Browse online or download pdf Assembly Notes for Indoor Furnishing BluDot DODU BED-TWIN. BluDot DODU BED-TWIN 2 pages.
Print Page
A s s e m b l y N o t e s
1
Larger hole pattern
A s s e m b l e o n c a r p e t o r p r o t e c t i v e m a t .
1
Orient each siderail
A
as shown in diagram 2. Note that the end closest to the headboard should have a larger hole pattern on the side.
Push the hooks on the side rails into the slots in the headboard and footboard. Firmly press down on the siderails to make sure the hooks
engage.
2
Attach the rails together by screwing in the corner brackets. First attach the smaller brackets
bracket in place, add a washer, and then a screw. Use the hex key to tighten the screws. Repeat to attach the larger brackets
footboard and side rails.
H A R D W A R E I N V E N T O R Y
16 screws
A
B
to the headboard and side rails. Place the
1 hex key
16 washers
D O D U B E D - T W I N
C
C
to the
2
B
BLU DOT DESIGN AND MANUFACTURING, INC. copyright 2007.
www.bludot.com / t. 612.782.1844 / f. 612.782.1845
PA G E 1
X4
REV 1 2007.01.05