3M Multimedia Projector X62 Safety Manual - Page 12

Browse online or download pdf Safety Manual for Projector 3M Multimedia Projector X62. 3M Multimedia Projector X62 15 pages. 3m digital projector specifications
Also for 3M Multimedia Projector X62: Brochure & Specs (4 pages), Specifications (2 pages), Quick Start Manual (4 pages)

Print Page

3M Multimedia Projector X62 Safety Manual

3M™ Digital Projector X62

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws

. (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place.

Optional Lamp: 78-6969-9875-2 (Contact 3M Customer Service.)

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(2) Lamp access door

(1) Screw

3M™ Multimedia Projector X62 Product Safety Guide

Note

(3) Screws

(4) Handle