Blue Aura Blackline PG1 User Manual - Page 6

Browse online or download pdf User Manual for Turntable Blue Aura Blackline PG1. Blue Aura Blackline PG1 13 pages. Bluetooth turntable player

Print Page

3. Lower the tonearm lift and position the cartridge in the space between tonearm

rest and platter. Carefully rotate the Counterweight until the tonearm balances out.

The tonearm should return to the balanced position if it is moved up or down. This

adjustment must be done carefully.

4. Once the tonearm is correctly balanced return it to its rest. Hold the

Counterweight without moving it, and gently rotate the Down force Scale ring until

the zero is in line with black line on the rear of the tonearm. Check whether the arm

still balances out.

5. Rotate the counterweight counter clockwise (seen from the front) to adjust the

down force according to the cartridge manufacturer's recommendations. One mark

on the scale represents 0.05g of down force.

NOTE: The recommended down force for the factory fitted cartridge is 3.5±0.5g.

Anti-skating force adjustment

The anti-skating force must be adjusted corresponding to the

down force as follows:

Down force

5 - 10mN

10 - 15mN

15 - 20mN

20mN and bigger

Slip the loop of the anti-skating weight's thread over the 3rd groove of the stub to

set the correct anti-skating force for the factory-fitted cartridge. Feed the thread

through the loop of the wire support.

This turntable uses a moving magnetic cartridge. Set the PHONO & Line Out Switch

to PHONO mode. Connect the phono out cables to the phono input on your

amplifier of pre-amplifier (phono stage). Line inputs such as CD, Tuner, Tape, or

Video are not suitable for phono inputs. Make sure the amplification of the selected

Groove in the stub

1 st from bearing rings

2 nd from bearing rings

3 rd from bearing rings

4 th from bearing rings