DNF Controls 4000CL-MAV-T-PBIO User Manual - Page 17

Browse online or download pdf User Manual for Network Card DNF Controls 4000CL-MAV-T-PBIO. DNF Controls 4000CL-MAV-T-PBIO 20 pages. 250 clip fast access system with peripheral bus interface option for sony mav-555 video servers
Also for DNF Controls 4000CL-MAV-T-PBIO: User Manual (20 pages)

Print Page

16. FUNCTION TABLE

Function
GOTO ENTERED
[SHIFT] + [RECUE]
TIME
FFWD
[FFWD]
JOG
[JOG]
LAST CUE
[LAST CUE]
NEXT CUE
[NEXT CUE]
RECORD
[REC]
REWIND
[RWD]
SHUTTLE
[SHUTTLE]
SLOMO
[SLOMO]
SLO-MO SPEED
[SHIFT] + [SLOMO]
PRESET
STOP
[STOP]
GANG VTRs
[SHIFT] + [VTR #1]
OR
[SHIFT] + [VTR #2]
OR
[SHIFT] + [VTR #3]
OR
[SHIFT] + [VTR #4]
TIME MODE
[TIME MODE]
SELECT
17 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option
Key Press
Search the VTR to the manually entered time.
Use the ST300 numeric keypad.
Press [ENTER] or [RECUE].
Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
Select JOG mode and enable Wheel.
Step to the previous Cue Point Location.
Step to the next Cue Point Location.
Places VTR into the Record mode selected by RECORD
MODE in the SETUP MENU.
Press [RECORD] or [RECORD] + [PLAY].
Press and HOLD to shuttle. Release key to stop. Set WIND
Speed in MENU.
Select SHUTTLE mode and enable Wheel.
Press [SLOMO] to slo-mo the VTR. Turn the Wheel (or move
the T-Bar if available) to change the play speed. Press
SLOMO] to STILL frame.
OR
Press any transport key to exit SLOMO.
For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the
slo-mo speed. Turn the Wheel to select desired speed. Press
[ESC] or any transport key to exit.
Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
Press and Hold [SHIFT]. Then when lights go out, press VTR
keys to include in the gang. Press [SHIFT] to escape gang
setup mode. Flashing LED indicates VTR or HDD being
monitored for status.
Press to toggle between Timecode (TC), VITC (VT) or Tape
Timer (TM) display modes.
Description