DNP IDW520 Quick Start Manual - Page 9

Browse online or download pdf Quick Start Manual for Digital Camera DNP IDW520. DNP IDW520 17 pages. Id photo system
Also for DNP IDW520: Startup Manual (17 pages)

Print Page

IDW520 Photo ID System

1. Start the System

• Follow the proper sequence when powering ON the system. First the

photo printer, then the IDW520 console, and finally the passport

camera. Do not turn the camera ON until you see the console main

screen.

• When you see the CAMERA CONNECTED message on the console,

you're ready to begin. This takes about a minute.

2. Take the photo.

• Place the subject in front of a white or off-white background with no

textures or patterns.

• Have the person stand (or sit) close to the background to minimize

shadows.

• If possible, use lights to properly illuminate the subject and/or use the

camera flash to further reduce shadows.

• Stand 6 feet (2 meters) away from the subject. Hold the camera so that

the camera lens is eye-level with the subject.

• Center the subject's head in the guide on the camera screen. Use the

zoom to line up the subject's head within the guide.

• Take the picture.

• Review the photo on the camera screen and verify that the subject's

head fits within the guides.

• Press the Fn2 button on the top of

the camera.

• The print count menu appears on

the camera LCD screen. Check that

print count is 1 and press the MENU/

SET button to send the image to the IDW520

console. The printer icon appears

and the image transfer begins.

3. Exit PLAYBACK Mode.

• Press the PLAYBACK button again to exit PLAYBACK mode and return

to CAMERA mode.

Do not leave the camera in PLAYBACK mode.