Blue Clean AR383 Owner's Manual - Page 4

Browse online or download pdf Owner's Manual for Pressure Washer Blue Clean AR383. Blue Clean AR383 16 pages. Power washer
Also for Blue Clean AR383: Owner's Manual (16 pages)

Print Page
Blue Clean AR383 Owner's Manual
En - 4
•
The power washer is equipped with a Ground Fault Circuit Interrupter
(GFCI) which greatly reduces the chance of electric shock while the unit is in
use.
•
Point the spray gun in a safe direction when beginning a power washing
session.
•
When first using the spray gun, hold the spray gun and lance with two
hands when pulling the trigger until you get used to the "kick back" from the
spray gun (one hand to pull the trigger and the other to stabilize the gun
assembly).
•
When you press the power switch to turn off the power washer, water
pressure may remain in the system. To discharge the pressure, point the
spray gun in a safe direction and pull the trigger.
•
Never spray flammable liquids.
•
Never use the power washer in areas that contain combustible dust, liquids
or vapors.
•
Avoid contact of the pressure hose with sharp objects and examine the hose
regularly. Replace if damaged. Due to the high pressure involved, it cannot
be repaired if cut of damaged.
•
Only use detergent specifically formulated for power washers and follow
instructions on the detergent's label. We have a selection of power
washer detergents to choose from. Go to www.arblueclean.com for more
information and to order the detergents. Power washer detergents are also
available at your local hardware store.
•
Protect eyes, lungs, and skin from exposure to detergent. Dish or laundry
soap is too thick and will clog the nozzle of your detergent bottle.
• IMPORTANT: Store the power washer indoors to prevent the water in the
unit from expanding under freezing conditions. When the water freezes and
expands, your power washer will be damaged and become inoperable. Or,
if storing outdoors, it is recommended you use Pump Saver. Pump Saver
can be purchased on our website: www.arblueclean.com. See details in the
Pump Saver section of this manual.
•
Never use hot water with your power washer. It will overheat and damage
the high pressure pump.
•
Never leave the power washer unattended while it is powered "on".
•
Always turn the water supply "on " before turning the power washer power to
"on". Running the pump dry will cause damage to the internal components.
•
Never use a water supply to your power washer that exceeds 150 psi
maximum.
•
Never disconnect the high pressure hose from the power washer while the
system is pressurized.
•
Never permanently engage the trigger mechanisms on the spray gun.
•
Never operate the power washer unless all components are properly and