Blue Clean 7850 Use And Maintenance Handbook - Page 15
Browse online or download pdf Use And Maintenance Handbook for Vacuum Cleaner Blue Clean 7850. Blue Clean 7850 20 pages.
Print Page- 1. Table of Contents
- 2. Machine Identification
- 3. Technical Features
- 4. Main Parts
- 5. Safety Regulations
- 6. Machine Installation
- 7. Machine Start up
- 8. Regulation of the Operating Pressure
- 9. Hydraulic System
- 10. Labels
- 11. Maintenance
- 12. Maintenance
- 13. Cooling Coil Internal Cleaning
- 14. Warranty
- 15. Declaration of Conformity
- 16. Declaration of Conformity
AR BLUE CLEAN
WARNING !
• All the fixing and maintenance operations must be carried out by authorized
personnel.
• All maintenance operations must be carried out keeping the machine on an even
floor. The machine must be disconnected from the main power and from the water
supply.
• A correct use and maintenance are necessary to guarantee the machine's
reliability and it's best performances.
• In order to ensure regular and constant performances it is recommended to use
original spare parts only.
• The machine you have bought has undergone a factory test which ensures correct
running at standard conditions.
• Beware! In case the cleaner has been kept inoperative for a long time, run some
water through the coil until it comes out before using it again. Besides preliminary
controls, the cleaner needs constant checks that are to be carried out according to
following time schedules:
Daily
Check the oil level of the
pump, after having removed
the cover. Unscrew the cap fig.
10 pos. A, check the level which
should be between the max and
the min., fig. 10 pos. B and if
necessary
add
some.
having checked the level place
back the cap and the cover. It is
recommended to use oil type
SAE 15W/40. The first oil top up
should be carried out after one
week work.
Check the working condition of the feeding hose and the extension cable.
EVERY 2 WEEKS AND AFTER 50 HOURS WORKING SHIFT
Clean the water filter placed in the water inlet (fig. 5, pos. E).
Replacing the fuel filter.
Remove the cover from the machine (check the filter
cleaning). If dirty, replace it with a new filter.
Every month or after 100 hours of work
Clean the combustion head and check the electrodes. Remove the cover,
unscrew the three screws fig. 12 pos. A, extract the combustion head group pos. B.
USE AND MAINTENANCE HANDBOOK
After
Fig.10
A
Fig.11
7830 - 7850 - 7870
B
MAX
MIN
page 15