dobar 50130 Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Pet Care Product dobar 50130. dobar 50130 8 pages. Automatic pet feeder for cats & small pets

Print Page
Tip: If you pressed the SET key a 3rd time but you do not want to feed 3 times
per day, press the TIMER key, then Press and Hold the SET key (for 2 seconds)
to start over, remember not to press the SET key after the Second feeding,
press the START key to end your daily feedings
12h-Format
nachmittags
Ziffer 2
Ziffer 1
Ziffer 3
Note: If all 4 feeding-times have been set, the process will terminate and
the schedule will start automatically. The next feeding time will then be
displayed.Feeding-times must be SET in ascending order otherwise the
remaining number of the feeding(s) will not be served.
Setting the Volume/Portion-Size
Press the VOLUME key to display feed-volume/portion-size
1.
2.
Press and hold (for 2 seconds) the SET key until Digit-4 flashes
Press the VOLUME key to set the desired volume/portion-size
3.
Note: A Feed-volume of 1 equals 0.05cups (12cc) of food, 2 means 0.1cups
(24cc) of food, 3=0.15cups (36cc) and so on.
Press the START key to confirm the volume setup
4.
Setting the Number of Days to Feed
1.
Press the DAY key and the left side of the LCD shows the number of days your
Automatic Feeder will feed for until it stops. The default setting of (0) means
the feeder will feed continuously and never stop
2.
To change the number of days to feed, press the DAY key then Press and Hold
the SET key (for 2 seconds) until the days flash on the LCD
3.
Press the DAY key to change the number of days. Hold down the DAY key to
speed through the numbers
4.
If you set a number of days to feed (1 to 99 days) then at 6am after the last day
the feeder Alarm will start beeping. This Alarm is telling you no more food will
be served as the number of programmed days has ended
5.
To repeat the same schedule without any changes, just press the START key
6.
To feed continuously, set the number-of-days to 0
Note: When the timer-icon and all the numbers on the LCD display are
continuously ON, the feeding schedule has started.
Once a feeding schedule has started, you can force it to end by pressing
the SET and START keys together.
Recording a Voice Message to be played at feeding times
1.
Press and hold the REC key, the Red LED will turn on
2.
Speak your message. You have up to 6 seconds
3.
When finished, release the REC key
Playing back recorded Voice Message
1.
Press the PLAY key
2.
Your recorded message will now play
3.
At each Feeding your recorded message will play and repeat 3 times
Feeding Alarm
1.
Your PF-12 Automatic Pet Feeder has an ALARM (a continuous beeping) to
alert you to when your feeding schedule has ended and no more food will be
dispensed
2.
The Feeding Alarm will start at 6:00AM the next day to avoid disturbing
anyone during the night
3.
You can press any key to stop the alarm
4.
To restart your original feeding schedule, press the START key
Manually feeding your pet
Press the SET and VOLUME keys together, once.
Only 0.05cups (12cc) will be dispensed. The normal schedule and quantity will not
be affected
Sanduhr
Ziffer 4
Putting/Adding food to the Food Hopper
1.
Turn the lid of the hopper counter-clockwise to remove it.
2.
Pour in the desired quantity of pet food.
3.
Replace the lid paying careful attention to the alignment of the marker on the
lid with the marker near the lip of the food tank.
4.
To lock the lid, turn it clockwise until it stops.Your feeder is now ready.
Important Notes:
Power-on factory default settings are:
a) Number of Days to Feed=0 days (0=continuous),
b) Number of Feedings per Day=2 feedings at 7AM & 5PM
c) Volume/Portion-size=1 (0.05cups/12cc)
If you hear 10 beeping sounds and the feeder-drum isn't moving then the
tray-full detector has been triggered.
MAKE SURE THE FOOD SLIDE AREA IS CLEAR
Care and Cleaning
When the food tank starts getting dirty and there is a lot of loose food at the bottom
of the food tank, you can remove the lid and food tank for cleaning.
Refer to 12) Putting/Adding food to the Food Hopper if you have any problems
removing or replacing the lid.
Use a soft damp cloth to clean the feeder base which contains the control panel and
batteries.
Never get this part wet and do NOT wash with running water.You can wash the Food
Cover and Food Tank in warm soapy water.
DO NOT put these parts in the dishwasher or they will
be permanently damaged !!!
3