FLATLIFT EXTRA FLAT Operating Manual - Page 8

Browse online or download pdf Operating Manual for TV Mount FLATLIFT EXTRA FLAT. FLATLIFT EXTRA FLAT 16 pages. 43" / 50"

Print Page
O u t p e r f o r m . O u t l a s t .

Programming the remote control (S435):

You can also get additional remote controllers for your Flatlift system (optional extra). As the controllers are
coded, you have to programme them.
1) To access the programming key, remove the cover (image 1, no. 1) on the receiver.
2) Press down the left hand key (image 1, no. 2). After this, an LED (image 1, no. 3) will then flash slowly.
3) Holding the programming key down, press the first key on the remote control at the same time (image
2, no. 5). On recognising the remote control, the LED (image 1 no. 3) starts to flash rapidly.
4) Release both of the keys.
5) To store a second channel, repeat the procedure starting at step 2 using the second key on the remote
control (image 2, no. 6). If your remote control has been successfully recorded, you should hear a soft
'click' in the receiver when you press down the key on the controller.
1
C.05:
2
4
3
Image 2
Operating Manual

PRODUCT CONTROL

P.08
PRODUCT CONTROL
Image 1
6
5