FLAVIA Creation 400 User Manual - Page 7

Browse online or download pdf User Manual for Coffee Maker FLAVIA Creation 400. FLAVIA Creation 400 12 pages.
Also for FLAVIA Creation 400: User Manual (15 pages), Restart Instructions (2 pages)

Print Page

70-41-2651 iss4 UK C400 User Guide.qxd:OPS Guide US CAN Amend.qxd

S E T T I N G U P Y O U R B R E W E R

(Ref. C)

Press back / next to select 'water supply'

Select plumbed-in or jug filled by pressing Edit + / -

Press Exit menus

Fill with water

Plumbed-in - Connect

Jug filled - Fill via filler lid

to mains water at

Use COLD water only to fill.

back of brewer

PRIMING (INSTALL ONLY)

Note: You cannot brew drinks if you have not primed the

brewer first! The priming cycle fills the boiler with water.

After this, your brewer will be ready for use.

1. Enter operator menu (as per steps 1 - 2 in filling section)

2. Press back / next to select 'Hot tank control'

3. Press prime to activate

4. Wait until message 'tanks primed' appears

5. Press Exit menus

Once water is added, the display will read "WATER HEATING" and the brewer is now ready for use.

CONFIGURING ENERGY SAVING MODE

In order to conserve energy the brewer can be

configured to switch to standby mode after a

specified time of inactivity. To configure the energy

saving mode:

1. Enter Operator menu (push and hold bottom left and right buttons) (Ref. A)

2. Enter password (default password: press top right button 4 times) (Ref. B)

3. Press back / next to display the 'standby timeout (mins)' screen (Ref. D)

4. Set time period for brewer to enter standby in minutes by pressing Edit +/-

5. Press Exit menus

If brewer is inactive for the specified time it will enter standby mode. In this mode the boilers will

be switched off and the display will show a standby symbol (Ref. E)

1/5/09

15:26

Page 12

(Ref. D)

(Ref. E)

SAFETY AND INSTALLATION GUIDELINES

We at Mars Drinks are committed to safety in all aspects of our product design, manufacture,

installation and service.

SYSTEM APPROVALS

This system has been designed and manufactured in accordance with European legislation

relating to Safety and Electromagnetic Compatibility (EMC).

WARNINGS AND GUIDANCE

These warnings are provided in the interests of safety. Please read them carefully and ensure

anyone who is involved with routine cleaning and loading also reads them.

•

Ensure that the machine is kept on a level surface.

•

This system is for indoor use only. Never place outside, or allow to freeze. If freezing occurs

contact customer service or your local FLAVIA® supplier.

•

It is dangerous to change the specification or modify the systems in any way

•

Ensure access to the rear of the system can be achieved easily to allow isolation of the

electrical and water supply

•

Under no circumstances should you attempt to perform any servicing or repairs on this

system. Inexperienced persons may cause injury or malfunction. Always call customer service

or your local FLAVIA® supplier.

•

Do not immerse system in water

•

Only clean in specified areas as instructed

•

Do not install where a water jet could be used.

•

Supervision is required if the system is to be used by young children, aged or infirm persons

•

This system contains electronic circuits. Do not flash test.

•

Observe recommendations relating to regular inspection and testing of this system under the

"U.K. Electricity At Work" section

•

An ambient temperature range of +5°C to +30°C is recommended for system location

IMPORTANT NOTES

•

The system is flash tested before it leaves the manufacturing premises. Repeated flash

testing can damage insulation.

•

This system contains electronic components. Other tests that are available on portable

appliance testers are Load Test, Earth Leakage Test, and Output Test. These tests are not

required.

Notice

•

DO NOT FLASH TEST THIS EQUIPMENT

ELECTRICAL CONNECTION

•

If the plug is damaged it should be removed from the voltage supply, cut off and disposed of

carefully. NEVER ATTEMPT TO RE-USE.

•

If the mains cord or plug is damaged never attempt to replace; contact customer service or your

local FLAVIA® supplier.

•

Never attempt to plug in a cut-off plug into a mains socket. Such action may present a shock

hazard.