Dock Edge 776113962589 Manual

Browse online or download pdf Manual for Lantern Dock Edge 776113962589. Dock Edge 776113962589 2 pages.

Print Page

Mounting Instructions

• If your PostLite™ is loose on the post, wrap tape (electrical or

duct) around the post until the PostLite™ has a snug fit on the

post. Secure the PostLite™ to the post with a set screw.

3-1/4" ID Posts

Remove top cap of the post.

Clean the inside edges of the post.

Apply glue if necessary to the inside of the post or drill a hole for a

set screw through the post. Use an appropriate screw to act as a

set screw through the post and into the side of the PostLite™

base. Any one of the adaptors provided with your PostLite™ may

be used for installation in this size of post.

Changing LED Illumination color

There is no need to replace LEDs with the PostLite™ to change

colors. Remove the threaded solar cap and flip the appropriate switch to the

"ON" position as per the chart below to illuminate the desired color LED.

SWITCH #

COLOR

WHITE

GREEN

BLUE

ORANGE

YELLOW

RED

Extreme weather conditions can reduce the life and efficiency of your PostLite™.

Winter Storage Tips

1. Extreme weather conditions can reduce the life and efficiency of your PostLite™ Ni-Cd or Ni-Mh battery. Remove and store your PostLite indoors if possible during the winter.

2. Remove the set screw from the PostLite™. Romove the PostLite™ and take indoors for winter storage. Unscrew the solar cap and remove the battery for separate storage from the PostLite.

3. If you have glued the base of your PostLite™ a 3-1/4" post or do not wish to remove the entire assembly, you may simply remove the solar top (Electronics Portion) and store the entire

electronic portion of your PostLite indoors. Cover the remaining PostLite™ base with plastic and tie or tape the plastic to the post to protect from the elements and moisture accumulation.

PostLite™ Quick Reference

1- The solar panel of the PostLite™ needs exposure to direct sunlight for several hours during the day to

accumulate a sufficient charge to light through the evening. If the operating time of the light is short, try

moving the PostLite™ to an area exposed to sunlight for a longer duration during the day.

2- Ensure that the battery is seated properly and is correctly installed.

The negative side of the battery goes against the spring contact.

Periodically inspect the battery connections for corrosion.

3- If the battery is not charged sufficiently, or if the battery is damaged, the length of time

the PostLite illuminates will be reduced.

4- If the LED does not work, try another LED color to determine if it is the result of

poor battery performance or a burnt out LED. If the alternate LED illuminates, the

battery may require replacement. Use only Ni-Cd or Ni-Mh batteries.

5- If you have a question or a problem has not been adressed here visit www.dockedge.com or call (800) 295-3625

IMPORTANT: For best performance, replace with rechargeable AAA Ni-Cd or Ni-Mh battery.

PostLite™ 1-Year Limited Warranty

DockEdge+ Inc. warrants the PostLite™ to be free from defects in workmanship and material present at the time of shipment from the factory for a period of one year after the date of purchase by the orig-

inal purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned to the retailer. To obtain warranty service, you must

present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or

by affixing any accessories, is not covered by this warranty. There is no other express warranty. The retailer hereby disclaims any and all warranties, including but not limited to, those of merchantability

and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty, which cannot be disclaimed, is limited to the time period as specified in the express warranty. Some

states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out

of or in connection with the product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of the incidental or consequential damage, so the above exclu-

sion or limitation may apply to you. This warranty gives specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

1-5/8"

1-7/8"

(41mm)

(48mm)

IMPORTANT:

PostLites™ are NOT intended for use as navigational lighting.

1 1

2-3/8"

3-1/4" ID Posts

(60mm)

(83mm)

Battery Removal and Installation

1. Unscrew off the top cap with solar panel.

2. Unscrew the two screws holding the circuit board in place.

3. Replace battery with AAA (triple A) rechargeable Ni-Cd or Ni-Mh batteries

4. Reinstall the circuit board and screw the solar cap on snugly to properly

seal your PostLite™!

2 2

3 3

CAUTION: Contains Nickel-Cadmium batteries. Expired batter-

ies must be recycled or disposed of properly.

For PostLite™ Service or Warranty contact

35 Armthorpe Rd., Brampton, Ontario, Canada, L6T 5M4

Toll Free: 800-295-3625

Remove the single screw from

the bottom of the PostLite™

lens and remove the reflector.

Place the lens into the desired

position and secure with a fas-

tener through the single hole in

the bottom. Insert domed

reflector back into the bottom

of the lens and screw the solar

cap back on.

Universal Flat

Surfaces

4 4