DockCraft CR 100 Manual - Page 4

Browse online or download pdf Manual for Boating Equipment DockCraft CR 100. DockCraft CR 100 15 pages.

Print Page

Attach Cradle Handle :

1 - Position Handle over Cradle.

2 - Slide the Handle over extension on Cradle.

3 - Depress Snap Button on Cradle.

4 - Seat Handle until Snap Button pops through the Handle hole.

5 - Repeat process for the other side Cradle.

Steps 1 – 4

Handle

Pivot

Lateral

Cradle

Canoe Rack

Notes - Lifting Straps are on the inside

Canoe Rack – Shorter Legs on the inside

Insert Clevis Pins and Retaining Rings on Pivot Lateral:

6 – If the Water Level is 10 to 25 inches below your Dock Decking -

Insert Clevis Pin through Hole 2 in Pivot Lateral such that the head is between the

Pivot Lateral and Cradle, attach circular retaining ring through the hole in the end

of the clevis pin.

7 – If the Water Level is 25 inches or greater from the Dock Decking –

Insert Clevis Pin through Hole 4 in Pivot Lateral such that the head is between the

Pivot Lateral and Cradle, attach circular retaining ring through the hole in the end

of the clevis pin.

Hole 4

Hole 2

Clevis Pin

Head

Assembly Instructions

Canoe Rack

Circular

Retaining

Ring

Page 4 of 15

Snap Button

Cam Buckle

Circular

Retaining Ring

Hole 4

Hole 2

Clevis Pin

Head