Fleetminder OBD300 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for GPS Fleetminder OBD300. Fleetminder OBD300 2 pages. Obdii 3g / gps vehicle tracker

Print Page

Alerts:*

Engine Management Alerts

1. Go to Alerts on the top menu bar.

2. Select Engine Management Alerts.

3. Select the vehicle from the list and it will display the

current alert settings.

4. Click the Save button to continue.

Device Removal Alert and Over Speed Alerts

1. Under the Alerts menu, select General Alerts.

2. Select the vehicle from the list.

3. In General Parameters tick to box labelled Trigger

Main Power Cut Alert, speed limit is selected via the

drop down menu list labelled Speed.

*When setting alerts, a recipient's email or mobile

number must be entered to receive the alerts. To receive

mobile alerts, a mobile number must first be entered in

Setup > Messaging Service.

Monitoring:

For real time monitoring, go to the Vehicle on the top

menu bar, in the drop down menu you will see Real Time

ECU Monitor.

Note:

The OBD300 comes preconfigured to your vehicle's OBD

protocol (ie. Passenger car, Heavy Vehicle). The device will

not change protocol mode if reinstalled in a different

vehicle type. Device reset can only be performed by

calling Fleetminder Tech Support on (08) 9383 7833.