Fleetwood LT-2,0 SUPER GOURMET Instruction Manual - Page 5
Browse online or download pdf Instruction Manual for Blender Fleetwood LT-2,0 SUPER GOURMET. Fleetwood LT-2,0 SUPER GOURMET 14 pages. Professional blender
Print Page
1. INTRODUCTION
1.1 Safety
When using this equipment, keep in mind some basic safety precautions:
1.1.1 Read all the instructions.
1.1.2 In order to avoid the risk of electric shocks and damage to the machine, never
install equipment on a wet or humid surface nor dip it in water or any other liquid.
1.1.3 The use of the equipment must be supervised when used next to children.
1.1.4 Before cleaning and when not in use or before inserting or removing
accessories, disconnect machine from power source.
1.1.5 Never touch parts of the machine while on movement.
1.1.6 Do not use the equipment if cord or plug is damaged. Do not use the
equipment if it is not working correctly, nor if it has been damaged in any way. In
case that happens, take the equipment to the nearest Technical Assistance to
check it up.
1.1.7 The use of accessories not recommended by the manufacturer may cause
personal hurt.
1.1.8 Keep your hands or any tool out of the machine while operating to avoid
personal hurt or any damage to the equipment. If it is needed to mix etc. switch OFF
and unplug the blender, use only a rubber spatula.
1.1.9 The knives are very sharp. Be careful while handling them.
1.1.10 – Always put the lid on the blender before turning it on.
1.1.11 – Always hold the cup while the blender is working. If the cup gets loose,
immediately turn the machine off.
1.1.12 – Do not use the machine outdoors.
1.1.13 – Do not leave the electric cable on the edge of the table or counter nor
let it touch hot surfaces.
1.1.14 – Do not leave your blender working without supervision.
1.1.15 – Never use water spray directly upon the machine.
1.1.16 – Never turn the machine on with wet clothing or feet.
1.1.17 – Do not operate the equipment with the blade loose, disassembled or
damaged.
Your machine has a thermal relay N°09(Pic.01) that monitors the motor
temperature and automatically turns the motor off in case of overheating.
To restart it, remove the cup from the base and wait until the motor cools
down. After the motor is cool replace the cup and press the button located in the
back of the machine
Check your operation if the motor is overheating often..
IMPORTANT
02