DOD Is200W User Manual - Page 18

Browse online or download pdf User Manual for Dash Cameras DOD Is200W. DOD Is200W 20 pages.

Print Page

ADDITIONAL INFORMATION

HOW TO PLAYBACK ON COMPUTER

If the camera you purchased with GPS logger, please download the DOD GPS

player with the CD-ROM (included), or go to http://www.dod-tec.com/ to

download and install the DOD GPS player.

If the camera you purchased without GPS logger, please go to

http://www.videolan.org/vlc/ to download and install the VLC PLAYER.

HOW TO PLAYBACK ON OTHER DEVICES

There are AV OUT and HDMI OUT slots on the unit for Playback Mode Please

plug the AV or HDMI cable to the unit and connect the other end to the video/

audio equipment.

* It requires the camera to be connected to a constant power supply.

FIRMWARE UPGRADE

Please visit DOD Tech official website (http://www.dod-tec.com) to download

the latest firmware for your unit. Before download the updated firmware, please

navigate to the System Menu and select "Version" to view the current firmware

version.

- Connect the micro SD card into the computer.

- Access DOD Tech website (http://www.dod-tec.com) to download the latest

software to the SD Card.

- Insert the micro SD card to the unit

- Connect the unit with the external power supply*. The unit will automatically turn

on, and running about 40 seconds for firmware upgrading.

- The unit will automatically reboot once finished the firmware update.

- Be sure to format the SD memory card once finished firmware update.

* Recommend connecting the unit with the external power supply instead of using the

built-in battery, it might cause the firmware update failure due to power interruption.