DOD VoFX Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Computer Hardware DOD VoFX. DOD VoFX 16 pages. Vocal fx processor/mic pre

Print Page

) PROGRAM AND BANK SELECTOR FOOTSWITCHES- These footswitches give

you access to the User Programs in the VoFX and allow you to change User Banks.

2) EFFECT GROUPS - The VoFX's effects are divided into 13 groups and labeled on

the front panel. When lit, the LED in each group indicates that an effect in the

group is active.

3) EFFECT SELECTOR BUTTONS (VOCAL FX)- This row of buttons lets you select

an effect group for editing, or to bypass the group completely. This group includes:

Preset Level, Mix, Reverb, Echo, Multi Delay, Detune, Pitch Shift, Phase, Tremolo, Pixellator, Ring

modulator, Chorus, Flange, Gate, High EQ and Low EQ.

4) EFFECT SELECTOR BUTTONS (MIC PREAMP) - This row of 4 buttons lets

you change your basic preamp section settings. The preamp section consists of the

Mic Driver, and Compressor groups.

5) STORE BUTTON - Stores your custom Programs in the User memory location

you select.

6) DISPLAY - The LED display in Program mode, shows which Bank and Program is

currently selected. In Edit mode, it shows the number and/or status of the selected

effect.

7) DATA WHEEL - In Program mode, use the Data wheel to scroll through

Programs. In Edit mode, use it to change the setting of effect groups.

8) CLIP LED - The red Clip LED lights when clipping occurs at the input of the

VoFX. To eliminate clipping, reduce the setting of the Input Level control or the

Master Level parameter.

9) INPUT KNOB - Controls the level of the signal at the VoFX's input stage.

10) OUTPUT KNOB - Controls the overall output level of both the Left and Right

outputs.

Signal Processing