CANNICE E1 Instruction - Page 13

Browse online or download pdf Instruction for Headphone CANNICE E1. CANNICE E1 15 pages. Wireless sports earphone

Print Page
CANNICE E1 Instruction
Turn on voice
prompts: enter pairing mode: Press the volume "+"
button for 3 seconds, the blue LED lights flash 3 times;
Turn off voice
prompts: enter pairing mode: Press the volume"-"
button for 3 seconds, the red LED lights flash 3 times.
Clear paired list
Make sure the earphone is turned off, press and hold the Multifunction
button until the LED indicator flashes red and blue alternately (About 7
seconds), then release Multifunction button. Press volume "+" and
volume "-" button at the same time until LED flashes blue, then LED
flashes red and blue alternately, the paired list was cleared, the
earphone will enter pairing mode after power on next time.

Hard reset

If the earphone cannot be turned on even when fully charged or does
not respond during use, follow the instructions below to reset it.
1.While pressing and holding the multifunction button, connect the
earphoneto your PC's USB port or a USB power adapter with the
charging cable.
2.Keep pressing and holding the Multifunction button until the
earphone turns on. The earphone is now reset.