Clinton Electronics CE-M10A Manual - Page 12

Browse online or download pdf Manual for Monitor Clinton Electronics CE-M10A. Clinton Electronics CE-M10A 19 pages. Public view monitor

Print Page

System Settings

• Language:

does not change the flashing on-screen message. This must be changed in the Special

Control > Message setting.

• OSD Timer:

to close the OSD menu upon exit button press only.

• OSD Transparency:

• Key Lock:

Special Control-

• Message On/Off:

• Message:

Message Options: Recording in Progress, Welcome, Grabacion en Progresso,

Bienvenida). There are also two selections that alternate the English and Spanish

versions of these messages (Flash must be set to "ON" for these selections).

• Flash:

Turning Flash "ON" enables the on-screen message to flash on and off. If

bilingual message is selected, this option must be "ON" to see message in both

languages.

• LED Control:

• LED Control with Panel:

feature is on, and the PVM enters sleep mode, the LED will turn on. Turn this setting

off in OSD menu to turn LED off.

• Image Orbit:

• Motion Panel Off Time:

number of minutes. LCD will turn back on when motion reoccurs.

• Recall:

Pressing the right arrow button while recall is highlighted will reset the

display's default factory settings. Resets Video, and select System Settings only. Does

not effect camera settings.

• Camera Reset:

reset the IP camera settings including the Username and Password.

• Camera Default:

will reset the camera to factory defaults. This does not effect Username and Password.

Display the OSD menu in English or Spanish. Note: Changing the Language

Set the time in seconds before the OSD menu disappears. Turn timer OFF

Set the transparency level of the OSD menu.

This selection is non-functioning on this model.

Turn the on-screen message on or off.

Select from preset on-screen messages, or Anti-Theft graphic banner

Turn the Flashing LED on the front of the display on or off.

Use this in conjunction with the sleep timer. When this

Slightly shifts the screen image to prevent screen image burn-in.

Puts the LCD to sleep when no motion is present for the set

Pressing the right arrow button while Camera Reset is highlighted will

Pressing the right arrow button while Camera Default is highlighted