Etac Molift EvoSling HighBack User Manual - Page 7

Browse online or download pdf User Manual for Sling Etac Molift EvoSling HighBack. Etac Molift EvoSling HighBack 12 pages.

Print Page

Sitting position

1. Ask the user to lean forward, support him if

necessary with one hand. Use the application

pocket and slide the sling down behind the user's

back until it reaches the seat. Make sure the top

of sling is positioned so it supports the users head.

2. Pull the leg supports forward and position

them under the user's thighs. Use the application

pocket on the leg support for easier application.

3. Make sure the lifting straps are the same length

on both sides and that the sling is placed under

the users tighs without any folds.

Cross the leg loops by pulling one of the loops

through the other and connect all 4 lifting straps

to suspension. Make sure the lifting straps are

fastened with equal length on right and left side.

Upper straps and legstraps can be mounted with

different colour on ladder loop to make sure sling

is comfortable and safe.

Sling application

Lying position

1. Turn the user towards you so that they are

lying in a safe position on their side. Place the

sling with the bottom edge in line with the users

coccyx. Make sure the sling is placed in the centre

on the users back, and that the top of the sling

is positioned to support the users head. Fold the

sling so it is possible to pull out the folded side

after turning the user over on the other side.