DOEPFER A-188-2 Manual - Page 14

Browse online or download pdf Manual for Control Unit DOEPFER A-188-2. DOEPFER A-188-2 16 pages. Bbd module, system

Print Page

DOEPFER

The BBD audio output is filtered by a low pass (e.g. A-108).

The frequency of the low pass filter follows the BBD clock

frequency as the CV output of the module A-188-2 is used

to control the frequency of the low pass filter. If both outputs

have to be filtered another low pass is required for the

second output.

An additional filter can be used at the audio input of the A-

188-2 to limit the frequency range of the processed audio

input signal.

Clock Filter

System A-100

Clocked or voltage controlled feedback type

The single outputs of the A-188-2 are patched to the inputs

of the addressed switch A-152. The common output of the

A-152 is patched to the feedback input of the A-188-2. The

CV or the clock input of the A-152 is used to switch between

different feedback types. If a sequencer is used for each

step of the sequence another feedback type can be chosen.

The digital output #7 of the A-152 is connected to the reset

input to limit the number of used steps to six.

BBD Module A-188-2