DOEPFER d3m User Manual - Page 7

Browse online or download pdf User Manual for Electronic Keyboard DOEPFER d3m. DOEPFER d3m 12 pages. Organ keyboard

Print Page

•

Two or more d3m are in use: In this case the Midi in/outputs of all d3m are daisy

chained. Midi out of the first d3m is connected to Midi in of the second, Midi out of the

second d3m is connected to Midi In of the third and so on. The Midi output of the last

d3m in the chain is connected to Midi In of the device to be controlled by the d3m (e.g. a

computer that runs Native Instruments' B4 or Emagic's evb3, or an organ sound

generator) via a suitable Midi cable. The Midi input of the first d3m remains unconnected

in this case. Each d3m requires a different Midi channel to be able to distinguish the

keyboards (see operation how to assign a Midi channel).

•

Two or more d3m are in use in combination with a d3c controller: The d3m and d3c are

daisy chained as described above but the d3c has to be the last link in the chain. The

Midi output of the d3c is connected to Midi In of the device to be controlled by the d3m

(e.g. a computer that runs Native Instruments' B4 or Emagic's evb3, or an organ sound

generator) via a suitable Midi cable. The Midi input of the first d3m remains unconnected.

Even in this case each d3m requires a different Midi channel to be able to distinguish the

keyboards (see operation how to assign a Midi channel).

Remark: The Midi input of d3m should be used only for connection to another d3m module.

The Midi input is not suitable for large amounts of Midi data (e.g. SysEx strings or Midi

messages coming from a computer sequencer) but only for small data rates like the

messages of another d3 module. In case of large amounts of incoming Midi messages data

loss or delay may occur.

FOOT CONTROL

This stereo jack socket can be used to connect a foot controller. Do not connect the foot

controller unless the d3m is switched off. The foot controller function is programmable (e.g.

volume, expression). For details please refer to the operation chapter. We recommend the

usage of the foot controller FP5. The foot controller is not included with the d3m and has to

be ordered separately if required. You may use even another foot controller that is connected

in this way:

high

low

end

10-100k linear

If you do not want to use a foot controller the socket remains unconnected.

This monophonic jack socket can be used to connect a (single) foot switch. Do not connect

the foot switch unless the d3m is switched off. The foot switch function is programmable

(e.g. rotary speakers, sustain). For details please refer to the operation chapter. We

recommend the usage of the foot switch VFP1. The foot switch is not included with the d3m

and has to be ordered separately if required. You may use even another foot switch that

uses a contact that is closed at rest (and opens when operated).

If you do not want to use a foot switch the socket remains unconnected.

d3m

Foot control connection

Page 7

User's Guide V1.2