Clipper CFP 11 Dry Operating Instructions Manual - Page 12

Browse online or download pdf Operating Instructions Manual for Trash Compactor Clipper CFP 11 Dry. Clipper CFP 11 Dry 20 pages.

Print Page

VERS. 2022.11.15

3 ASSEMBLY AND COMMISSIONING

Turn the fuel valve to the ON position. Fully press

the dead-man handle against the main handle.

Move the throttle control lever slightly to the left. Put

the engine switch on ON.

As the engine warms up, gradually move the

choke lever to the OPEN position.

Position the throttle control lever for the

maximum engine speed.

To stop the engine, release the dead-man handle, move the throttle control lever fully to the right,

then turn the engine switch to the OFF position. Turn the fuel valve to the OFF position.

CAUTION: when the machine is switched off, the tools will continue turning slowly to complete stop.

Be therefore very careful to avoid injuries.

Move the choke lever to the CLOSED position.

NOTE: do not use the choke if the engine is warm or the

air temperature is high.

Pull the starter grip lightly until you feel resistance, then pull

briskly.

CAUTION: Do not allow the starter grip to snap back

against the engine. Return it gently to prevent damage to

the starter.

CFP11 _MAN_EN