Cannondale Alloy Road Disc Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Bicycle Cannondale Alloy Road Disc. Cannondale Alloy Road Disc 16 pages.

Print Page

Some final pre-ride checks.

Confirm the handlebar is centered in the stem, and at the correct

height and angle. Adjust as necessary, taking care to keep the gap

between the stem and faceplate even from top to bottom.

Torque Bolts. Select the correct bit for the stem faceplate bolts and

install it into the torque wrench. Tighten the stem bolts in an "X"

pattern, ensuring the gap between the faceplate and stem remains

even.

Look for torque specification markings on the front and back of

the stem, as well as the head of the seatpost. If these markings are

absent, torque all stem and seatpost bolts to 7 Nm.

Seat Height. Adjust seat height by loosening the seatpost collar.

Standing next to the bike, position the saddle so it's the same height

as your hip.

SET-UP

STEP 1

STEP 2

STEP 3

STEP 4

PRE-RIDE CHECK