ClipperCreek ECS User Manual - Page 9

Browse online or download pdf User Manual for Electric Vehicles ClipperCreek ECS. ClipperCreek ECS 20 pages.

Print Page
THE ECS FRONT PANEL -
Ground (Earth) Monitor
The front panel on the ECS has four indicator
lights:
POWER (amber), indicates that power is
available to the ECS.
CHARGING (green), indicates that the
vehicle is requesting a charge and AC power is
currently applied to the vehicle.
POWER FAULT (red), indicates that the
ECS is not wired correctly. The problem can
be due to improper grounding or a missing
Earth Ground. The wiring should be examined
by a qualified electrician.
CHARGING FAULT (red), indicates that
the ECS is unable to communicate with the
vehicle correctly, or a safety fault condition
has been detected by the unit.
Table 1: Front Panel LED Information for Ground Monitor-equipped ECS
Amber
Green
#
Power
Charging
LED
1
OFF
2
ON
3
ON
4
ON
5
ON
6
ON
7
ON
*ECS will automatically restart after 15 seconds.
Red
Power
LED
Fault LED
OFF
OFF
OFF
OFF
ON
OFF
ON-not
OFF
blinking
OFF
OFF
OFF
OFF
OFF
blinking
Figure 1: The ECS with
Ground Monitor Front Panel
Red
Charging
Fault LED
No power to EVSE. Check
OFF
circuit breaker.
Not plugged into the EV or
OFF
the EV is not ready to charge.
Charging enabled, power is
OFF
applied to the vehicle.
Improper grounding or ground
OFF
is not present.
ON-not
Problem with EV communications
blinking
Disconnect and restart.
EV ground fault trip. Check
blinking
vehicle connection.
Internal EVSE fault. Call for
blinking
service.
Page 9
ECS User Manual
Fault Condition