Cyfral VIDEOMONITOR V7 Operating, Installation And Programming Manual - Page 2
Browse online or download pdf Operating, Installation And Programming Manual for Intercom System Cyfral VIDEOMONITOR V7. Cyfral VIDEOMONITOR V7 7 pages.
Print Page
INTRODUCTION
Before installing the device, read the following operating instructions. Installation may only be carried out by a
qualified person with the adequate qualifications.
This manual applies to the V7 Videomonitor which is part of the CC4000 system. The description of
programming and connecting with the rest of the system elements can be found in the
Manual.
Videomonior and devices connected to it are only allowed to be powered with extra-low voltage (ELV) with a
value not exceeding the allowable safe contact voltage. Power devices (12V DC power supplies)
comply with EMC and safety standards in accordance with applicable European Union standards and ensure
galvanic isolation from the power grid.
full
Fig. 1 View of the videomonitor connectors
DESCRIPTION OF CONNECTORS
Power
12V power supply from a local power supply or DV-4 distributor
TV-out
Composite output of image from the monitor
IN
Socket for connecting the DV-4 distributor
OUT
Socket for connecting another monitor
CAM1
Additional camera input 1
CAM2
Additional camera input 2
~2~
CC4000 System
must