Dog Care TC01-R1 Manual - Page 11

Browse online or download pdf Manual for Pet Care Product Dog Care TC01-R1. Dog Care TC01-R1 17 pages. Dog training collar

Print Page

VI. Match the Remote Control to the Receiver:

*You may skip this step because the set is already paired by factory setting.

Press and hold Channel Switch / Match Button for 5 secs. The

Receiver will vibrate and beep which indicates the matching is completed.

You will see "1" (or subsequent number) in the Channel Display when the

match is successful.

'beeps'

'vibrates'

Adding multiple Receivers:

After confirming that the receiver is turned off, hold the ON/OFF button

of receiver for 5 seconds until the LED indicator Light on receiver flashes

in green.Press and hold Channel Switch /Match Button for 5 secs

(repeat steps

2.1 and 2.2).

number of the new Receiver. Note: Connect only 1 Receiver at a time, do

not connect all simultaneously, or the Remote will match all Receivers into a

single channel.

'beeps'

'vibrates'

Removing all Matched Receivers:

Press and hold Static Level Regulator Activation Button and Beep Button

simultaneously for 5 secs. The Channel Display will default to "0". Note:

Make sure all Receivers you want to remove have power and in the effective

range, so that Receivers could receive the remove command.

VII. Training Tips

1. Reward your dog with food will usually help to achieve the best

result.

2. Do not use the device on dogs aged below 6-month, old, pregnant,

easily frightened, aggressive, in heat, old, and dogs not in best of health.

After confirming that the receiver is turned off,

hold the ON/OFF button of receiver for 5 seconds until

the LED indicator Light on receiver flashes in green.

The Channel Display will show the subsequent