Dog trace d-guard 940 Manual - Page 6

Browse online or download pdf Manual for Scouting Camera Dog trace d-guard 940. Dog trace d-guard 940 11 pages. Phototrap

Print Page

PREPARATION PHOTOPASTES

The d-guard 940 is powered by a 6V DC adapter (not included) or

4/8× 1.5V AA batteries (not included). For longer operating life, it is

recommended to use 8 batteries.

You can use the following types of 1.5V batteries:

we recommend using high capacity alkaline batteries

rechargeable lithium batteries

rechargeable NiMH battery

The d-guard 940 is equipped with a MicroSD memory card slot up to

32 GB (not included). Make sure the ON/SETUP/OFF switch is in the OFF

position before inserting or removing the MicroSD memory card. The

MicroSD card must be empty, i.e. no images from other devices. If the

MicroSD card has previously been used in other devices, format it

before using it from this camera or a computer. Many MicroSD cards

formatted from other cameras have poor compatibility with different

brands of cameras. If the card is new, you can use it without formatting.

Before inserting a MicroSD card, you must disable write protection on

the card itself, otherwise the phototrap will not function properly. After

performing the above steps, open the cover of the photo trap and insert

the MicroSD memory card all the way into the slot according to the

orientation indicated by the icon engraved next to the slot.

The ON/SETUP/OFF switch has three possible positions:

Position ON: In this position, the phototrap automatically takes

photos and records videos when the motion detector is triggered.

SETUP position: in this position you can use the MENU button to

access the functions listed in the table on this page.