Dogtra 1100NC Owner's Manual - Page 14

Browse online or download pdf Owner's Manual for Pet Care Product Dogtra 1100NC. Dogtra 1100NC 18 pages. Remote controlled
Also for Dogtra 1100NC: Owner's Manual (18 pages)

Print Page

TESTING

TESTING YOUR

COLLAR

1. Turn the power switch on by pressing the

button on the end of the collar receiver for one

second. The indicator light will come on for a

moment then blink once every two seconds,

showing that the collar is ready to use. (If the

red indicator light emits a double blink every

two seconds, the batteries need to be charged.)

2. Place the test light on the receiver contact

points and hold it there.

3. Set the transmitter intensity dial to level

one hundred and push the Constant button.

4. Watch the test light as you push the

Constant button on the transmitter.

It should glow brightly. As a safety feature the

collar will automatically turn off after twelve

seconds. To reactivate, release the button for

one second and the collar will reset.

5. Push the Nick button. The test light should

light for just a moment.

6. Change the intensity dial to level fifty and

repeat the test. The test light should glow

dimmer.

NOTE : It is normal for the test light not to come

on if the intensity level is set below level

zero.

TESTING