Dogtra 2300NCP EXPANDABLE Owner's Manual - Page 9
Browse online or download pdf Owner's Manual for Pet Care Product Dogtra 2300NCP EXPANDABLE. Dogtra 2300NCP EXPANDABLE 15 pages. Expandable up to 2-dog system additional receiver
Print Page
7. Charging the Battery
1. Charge the unit before using the unit for the first time.
2. Do not charge the batteries near any flammable
substances.
3. Fully charge the batteries if the unit is to be stored
without use for a period of 3 months or more.
Recharge the Unit if:
• The indicator light on the receiver is emitting a red
color.
• If the 3 bar indicator on the transmitter LCD shows just
1 bar.
• The indicator light on the transmitter or receiver will
not come on.
• The indicator light on the transmitter or receiver comes
on momentarily, but will not stay on when the Constant
button is pressed.
16
Battery Charging Procedure
Charging Cable
Two-dog unit only
The 2300NCP EXPANDABLE uses lithium-polymer
batteries.
The battery charger and charging cables allow you to
charge both the transmitter and receiver at the same
time. The battery charger is designed for a 120 volt wall
outlet.
Note 1: Only use Dogtra-approved lithium polymer
batteries and chargers for your Dogtra e-collar. This
will prevent any damage that can be incurred from
attempting to use a different charger.
Note 2: The unit has a partial charge when it leaves the
Dogtra facility. Upon receipt of the collar, be sure to give
it a full 2-hour initial charge before the first use. When a
charger is not in use, disconnect it from the power
source.
1. Plug the charging cables to both the transmitter and
receiver, as shown on page 16.
2. Plug the charger into a 120 volt wall outlet or, if
using the auto charger, plug into a cigarette lighter only
for lithium polymer batteries (use a 230 volt European
120 volt
Charger
Wall
Outlet
17