clivus multrum CM2 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Toilets clivus multrum CM2. clivus multrum CM2 13 pages.

Print Page

2.0 INSTALLATION

2.5

Ventilation Fan

If no 240v power socket is available, the fan can be connected to alternative power sources such as a solar power

system. Solar kits are available from Clivus Multrum. The fans are rated for voltages between 8 and 15 V DC.

2.6

passive vent system is where no electric fan is used and air flow is induced by the use of a turbo vent and the vent

"chimney effect".

A passive vent system can be installed however a continuous odour free system cannot be guaranteed. This option is

only used where the location is remote and no power source is available.

If installing passive vent system the following is recommended:

Remove the electric fan to ensure unrestricted air flow.

Increase the vent diameter to 4" DWV PVC as soon as possible after the exit from the pedestal.

If possible locate the vent on the Northern side of the building in direct sunlight and paint the vent

black.

Install a 100mm turbo vent on top of the vent stack to draw air when there is wind blowing outside.

The turbo vent and associated fittings can be purchased from Clivus Multrum.

2.7

Your CM2 comes with an embossed logo and model number on the top of the unit. The serial number can be located

on the back of the unit. Further details such as Clivus Multrum contact details, design capacity, operating condition,

electrical requirement and basic notice and instructions are located in the front page of this manual.

OM-CM2.201104

Updated: 04/11/2018

Page 7 of 13