Dogtra BALL TRAINER PRO Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Pet Care Product Dogtra BALL TRAINER PRO. Dogtra BALL TRAINER PRO 12 pages. Versatile dual-function launcher/dropper

Print Page

14. Code Setting

The transmitter has a code for each button. In order to add another receiver,

you will need to code the new receiver to the transmitter.

1) Make sure that the receiver is off.

2) Press and hold down the on/off button on top of the receiver for 5 seconds.

3) The LED indicator on the receiver will rapidly blink green. You can release

your finger from the button.

4) Press the number on the transmitter that you would like to code the

receiver to. You may check that it is properly coded by pressing the button

on the transmitter, which will activate the LED indicator light on the receiver

at the same time.

* You can code up to eight receivers to one transmitter

Warning!

Do not use any other transmitter before programming a new receiver. The

receiver can accidentally code to another transmitter if used at the same

time. If this happens, you will need to recode the receiver to the correct

transmitter.

GENERAL TRAINING TIPS

Getting Started With Your BALL TRAINER PRO

Your dog must know some basic obedience commands before beginning

training with the BALL TRAINER PRO. A dog learns by first being shown a

command, followed by lots of repetition over an extended period. As the dog

becomes proficient at these commands, the trainer can introduce distractions

and different locations to strengthen them.

For more training information, please visit our website at

www.dogtra.com.

MAINTENANCE

Basic Maintenance

After each training session, carefully inspect the unit for any missing parts or

damage to the casing. Damaged or broken casing may affect the unit. After

confirming that there is no damage to the casing, clean off any dirt or debris.

Storage Maintenance

The transmitter battery should be taken out before storing the unit for

extended periods of time. The receiver battery should be fully charged before

storing for extended periods. While in storage, the receiver should be given

a full charge once a month and before the first use. Store the units in room

temperature. Do not keep the units exposed to extreme climates.

Troubleshooting

If the unit is malfunctioning, please refer to the "Troubleshooting Guide"

before sending it to Dogtra for service. If you have any questions or concerns,

you may email them to [email protected], or call customer service

at 1-888-811-9111.

FCC WARNING

The BALL TRAINER PRO complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

This is a sensitive radio device. Any unauthorized changes or modifications to

this device that are not expressly approved by Dogtra will void the warranty,

and may void the user's authority to operate the equipment.

Please do not tamper or modify the unit.