Dogtra YS500 Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Pet Care Product Dogtra YS500. Dogtra YS500 8 pages. No bark collar
Also for Dogtra YS500: Owner's Manual (8 pages), Product Manual (14 pages)
Print Page
NOTICE :
When first using the Yapper Stopper , it is
recommended that you start with the lowest level.
If the dog continues to bark, gradually increase the
intensity level.
CONTACT POINTS
The contact points must make good contact with the
skin for the unit to function properly.
IMPORTANT : When screwing in the contact points,
tighten by hand only.
10
FITTING THE COLLAR
Tighten the collar around the dog s neck so that the
points are in contact with the dog s skin.
If the collar is too loose, the dog will not receive
correction when it barks.
Check the dog s neck daily for possible irritation
caused by the contact points rubbing the skin.
Do not leave the collar on for more than eight hours a
day.
IMPORTANT : Remove any other collars from your
dog when it is wearing the Yapper Stopper.
A metal collar or metal buckle that rubs against the
Yapper Stopper bark sensor may inadvertently activate
the unit.
MAINTENANCE
Periodically wash the Yapper Stopper with
alcohol or detergent. Before washing, make sure that
the battery cap is tightened.
Dry thoroughly after washing.
11