3M 8864 User Instructions - Page 6

Browse online or download pdf User Instructions for Respiratory Product 3M 8864. 3M 8864 6 pages. Particulate respirator n95

Print Page

! ! ! ! Pinching the nosepiece using one hand may result in improper fit and less effective

respirator performance. Use two hands.

6. Perform a User Seal Check prior to each wearing (Fig. 6). To check the respirator-to-face

seal, place both hands completely over the respirator and exhale. Be careful not to disturb the

position of the respirator. If air leaks around nose, readjust the nosepiece as described in step

4. If air leaks at the respirator edges, work the straps back along the sides of your head. If If If If

you CANNOT

you CANNOT achieve a proper seal, DO NOT enter the contaminated area. See your

achieve a proper seal, DO NOT enter the contaminated area. See your

you CANNOT

achieve a proper seal, DO NOT enter the contaminated area. See your

supervisor.

Removal Instructions

Cup the respirator in one hand to maintain position on face. Pull bottom strap over your head.

Still holding respirator in position, pull top strap over your head and remove respirator.

At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil.

This respirator contains no components made from natural rubber latex.

NIOSH TABLE PLACEHOLDER

Below the above line is a placeholder for appropriate addresses and phone numbers depending

on the country or region sold.

FOR MORE INFORMATION

In United States, contact:

Internet: www.3M.com/workersafety

Technical Assistance: 1-800-243-4630

For other 3M

For other 3M products:

For other 3M

products:

1-800-3M-HELPS or

1-651-737-6501

3M Personal

Personal Safety Division

Safety Division

Personal

Safety Division

3M Center, Building 0235-02-W-70

St. Paul, MN 55144-1000

3M PSD products are occupational use only.

38-xxxx-xxxx-x

98-0060-0030-2/1