Clockaudio CDT100 User Manual - Page 5

Browse online or download pdf User Manual for Accessories Clockaudio CDT100. Clockaudio CDT100 17 pages. Dante transporter
Also for Clockaudio CDT100: User Manual (16 pages)

Print Page

1 - Overview

The CDT 100 four input Dante interface is the ideal interface for adding mic inputs to a Dante system.

The small form factor to the CDT 100 allows them to be mounted almost anywhere, putting them close to the microphone

sources and minimizing interference-prone analog wiring.

CDT 100 Features:

Easy to install with under table mounting.

Audio and control signals transported over Dante.

4 X mic/line inputs using 3-pin de-pluggable connectors for "Balanced" or "Unbalanced" connectivity.

Provides phantom power for each input also supports a +48V phantom power option.

Power can also be daisy chained

The CDT 100 has 4 X connections to support the CH32 button and other Clockaudio control devices:

 CRM 202S

 CS S Series

 S 80S

 SM 80S

 TS001

The CDT 100 connects directly to ARM-C port for the ARM motorized microphone.

The CDT 100 has two network connections to allow Dante Daisy Chaining (DDC).

DDC further simplifies system infrastructure wiring by allowing multiple CDT100's to use a single CAT 5 home run connection

to a network switch.

Compatible with any Dante capable audio DSP.

The CDT 100 can be controlled and monitored with 3

Clockaudio 2015

Figure 1

- CDT100 front and back panel

party control software using direct UDP messages.

CDT100 User Manual