Clocking Systems ANALOGUE Instruction Manual - Page 15

Browse online or download pdf Instruction Manual for Clock Clocking Systems ANALOGUE. Clocking Systems ANALOGUE 19 pages. Electronic time recorder

Print Page

press +

or – button to set the printing position <0~9>

Press Enter again to register the setting value.

( The default setting is 0005.)

4.15 Detecting front/back of cards

Press Enter or Back to enter the program code 12.

Press +

or – button to select the flashing value "0000"

or "0001". "0000" is for closing this function, "0001" is for starting this

function. Press Enter again to register the setting value.

( The default setting is 0000.)

*The detection function operates only when you use specific time

cards (monthly pay cards) with front/back detection cut-out.

Press Enter or Back to enter the program Code 13,

Press +

or – button to set time signal duration and

the initial value (10 seconds) will appear.

The duration can be set from 0~99 seconds.

( The default setting is 0005.)

Press Enter again to register the setting value and enter

code 14 so as to setting the time of 1

Press +

or – button to set the Hour.

Press Enter again to register the setting value.

Press +

or – button to set the Minute.

Press Enter again to register the setting value.

Press + button to set the week.

Press – button to cancel the week.

Press Clear button to set everyday.

Doing the same as above to enter code 15~37 and complete the setting of

~24

ring times if necessary.

( The default setting is - - :- - )

Press Enter or Back to enter the program Code 38,

ringing

- 15 -