DogWatch Hidden Fence System Owner's Manual - Page 8
Browse online or download pdf Owner's Manual for Pet Care Product DogWatch Hidden Fence System. DogWatch Hidden Fence System 15 pages.
Also for DogWatch Hidden Fence System: Owner's Manual (14 pages)
Print Page
Installation
TRANSMITTER
CareM planning will prevent problems and save time. Keep a written record of the bound
aiy wire and splice locations to facilitate any servicing or additions you might make at a
later date. Work with the installer to determine the best location for each component.
Transmitter InstallatIon Steps:
1. Locate the transmitter in an area that is protected from weather such as a garage,
basement, or barn.
2. It must be close to a 110 volt electrical outlet.
3. Position the transmitter so that a hole drilled to the outside will not be noticeable.
4. Using the mounting screws provided, install the transmitter to fit snugly on the wall.
5. Drill a hole through the outside wall and feed the zip wire through from the inside.
6. Install your surge protector outside (see "Surge Protector,"page 12).
7. Plug the zip wire into the transmitter.
8. Plug the power supply into the transmitter.
9. Plug the green ground wire into the transmitter and attach the other end to the face
plate of your properly grounded electrical outlet.
I
I
SAMPLE INSTALLATION DESIGNS
BAsic Loop Wrni
GARDEN
FRONT
BOUNDARY
WITH EXISTING FENCE
BACK
Y~n
ONLY