ASG BLG-5000 Series Operational Manual - Page 10
Browse online or download pdf Operational Manual for Power Screwdriver ASG BLG-5000 Series. ASG BLG-5000 Series 17 pages. With built in screw counter, with built in screw counter and pulse system, for use with screw counter
Also for ASG BLG-5000 Series: Operational Manual (7 pages)
Print Page（３） When setup Teaching
coefficient or receiving a
message of setting
Teaching coefficient
（４） When setting other setting
values or receiving an Inquiry
Message
※Note: When you install our PC Application Software (sample), the following messages may be displayed on the
screwdriver.
■ List of Input messages
Function
No.
1
All functions availability
2
Cycle count
3
Min. Motor Revolutions
4
Max. Motor Revolutions
5
Work Reset Timer
6
Reverse Count Timer
7
System
8
Over Time - Short Time
9
Panel Buttons availability
10
No error time for double fastening
11
Version
12
Total Number of the driver shut off (Torque Up)
13
Release limitations total number of the driver
shut off
15
Detecting presence of work parts
17
Force-Counter Reset
18
Error Reset
20
Lever Control availability
21
Emergency Stop
23
Request to send setup value
25
Teaching coefficient
Note*1: For the setup values, please refer to the BLG operation manual.
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
HIOS BLG Series: BLG-BC2
Operational Manual
・ Work Reset Timer
・ Reverse Count Timer
・ System
・ Panel Buttons operation
・ No error time for double fastening
・ Teaching coefficient
・ Min. Motor Revolutions
・ Max. Motor Revolutions
Response messages for each setup
Inquiry
command
QP
Qn
Qc
QC
Qt
Qr
Qd
QU
Qo
QG
QV
QL
None
W
R:C
R:E
Lv
Em
QS
AR: d
2/5
| Phone: (
44110-3898
888) 486-6163
Setup command or command meanings
SP:0 (available)
SP:1 (unavailable)
Sn:x, x = setup value (1~99) Note *1
Sc:x, x = setup value
(0.00~0.99) Note *1
SC:x, x = setup value (0.00~0.99) Note *1
St:x, x = setup value
(0.0~3.9) Note *1
Sr:x, x = setup value
Sd:x, x = setup value
SU:x, x = setup value
So:0 available
So:1 unavailable
SG: No error time : (0～99)
resolution: 100ms
None
None
SL
W:0 without work parts
W:1 with work parts
Forcibly reset the count and the operation
Reset the driver after detecting absence of a
work part.
Lv:0 available
Lv:1 unavailable
Em:0 OFF
Em:1 ON
none
d: coefficient (%)
Any one of 0, 5, 10, 15 or 20%
BC2 Communication 1510-E HIOS Inc.
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com
216) 481-4519