ASG BLG-5000BC1 Operational Manual - Page 7
Browse online or download pdf Operational Manual for Power Screwdriver ASG BLG-5000BC1. ASG BLG-5000BC1 7 pages. With built in screw counter, with built in screw counter and pulse system, for use with screw counter
Print PageOperation
Changing the Setting Mode
Press the F1 Button for more than 2 seconds in the normal mode. "P"
will be displayed in the function display section and the mode will be
changed to the setting mode.
Setting Mode
Pressing the F1 button allows you to scroll through each setup function.
Refer to "Setting Function List" for the setting function details.
(Count)
(Count Timer)
(Work Reset Timer)
(Reverse Count Timer)
(System Setting)
(Over Time/Short Time)
(Accumulated Counter)
Operation
Changing to Normal Mode
Press the F1 Button for more than 2 seconds in the setting mode. The
mode will be changed to the normal mode and the value set for the
count will be displayed.
Counter ON/OFF Setting
Each press of the F3 Button toggles ON and OFF. (Note: F2 Button is
not to be used.)
Value Setting for Each Function
Each press of the F2 Button in the setting mode changes the figure
position for setting.
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
HIOS BLG-BC1 Series
Operational Manual
| Phone: (
44110-3898
888) 486-6163
Each press of the F3 Button increases the value one by one.
Note: The setting procedure is the same for all the settings
except for the "Counter ON/OFF Setting". Refer to "Setting
Function List" for the setting range.
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com
216) 481-4519