Doherty SCR01/WHITE Instructions For Use Manual - Page 8

Browse online or download pdf Instructions For Use Manual for Medical Equipment Doherty SCR01/WHITE. Doherty SCR01/WHITE 12 pages. Panel screen

Print Page

5. The panels must be fastened to the screen in a set order and orientation. Position

the first panel over the frame with the fixed castor leg and pivoting leg, as shown in

figure 3. Ensure the clips are to the inside of both legs as shown below. If the panel

slots do not line up with the clips to the bottom, you probably have the panel upside

down, rotate the panel through 180° and try again.

Fig 3: Aligning the panel to the bottom clips

6. Ensure the panel slot is aligned with the hole in the clip. Place a finishing washer

over the countersunk screw (ensure the countersunk hole in the washer is to the

same side as the countersunk head of the screw). With the allen key supplied

tightly screw the panel to the two bottom clips.

Fig 4: Screwing the panel to the frame

7. Slide the 4 remaining clips into the necessary positions and repeat step 6 for each clip.

8. Slide the panel/clips as necessary to centralise the panel in the frame.