Acquabella HERA Maintenance And Installation Manual - Page 11

Browse online or download pdf Maintenance And Installation Manual for Bathroom Fixtures Acquabella HERA. Acquabella HERA 16 pages.

3. FAQ'S
3. FAQ'S
1. 1. -¿What products may I use to clean my shower trays and AKRON Acquabella panels of dirt work?
-¿What products may I use to clean my shower trays and AKRON Acquabella panels of dirt work?
To clean any traces of glue and cement mortar joints use a descaler called Fugasoap (KERAKOLL), DETERDEK from FILA brand,
because it is specific for the removal of debris from construction works , also used for the removal of other components such as
salt, rust and cal , please read the instructions. DO NOT RUB , let the product act; NEVER USE PADS ( SCOTCH BRITE , or NATURAL
FIBER ) nor SOLVENTS , ACID, ALKALI OR ABRASIVE . After cleaning, rinse thoroughly and ensure sufficient ventilation of the
bathroom . It is not dangerous for the user and not dangerous for the environment .
2. 2. -¿What products may I use to clean my Acquabella AKRON shower tray and panels Daily?
-¿What products may I use to clean my Acquabella AKRON shower tray and panels Daily?
Soap and water applied with a sponge, non-abrasive. NEVER USE SCOURERS ( SCOTCH BRITE , or NATURAL FIBER ) nor SOLVENTS
, ACID, ALKALI OR ABRASIVE . In cases of stubborn stains you can use the so-called "magic erasers " which can be purchased at
anysupermarket.
3. 3.
-¿What material may I use for gluing or sealing Acquabella AKRON panels?
-¿What material may I use for gluing or sealing Acquabella AKRON panels?
The bonding of the various elements must be done using SIKAFLEX (SIKA), SUPERFLEX (KERAKOLL) or ULTRABOND (Mapei), and
sealing with MAPESIL (Mapei) or silicone nonacidic.
4. 4.
-¿What have thick wall panels that can accompany Acquabella AKRON of shower trays?
-¿What have thick wall panels that can accompany Acquabella AKRON of shower trays?
Wall panels have a thickness of 6 mm.
5. 5.
-¿What if the surface of AKRON Acquabella wall panel is damaged, has a solution ?
-¿What if the surface of AKRON Acquabella wall panel is damaged, has a solution ?
Although we encourage to protect panels during the works it is possible that for various reasons the surface could be damaged.
For these cases we have a REPAIR KIT with the same colour and easy application that will restore the colour and finish of your
panel for many years.
3. FAQ'S
3. FAQ'S
1. 1. ¿Welches Reinigungsmittel brauche ich zur Reinigung der Bauwerkreste?
¿Welches Reinigungsmittel brauche ich zur Reinigung der Bauwerkreste?
Wir werden Produkt Fugasoap (KERAKOLL), DETERTEK von FILA benutzen. Lesen Sie bitte die Bedienungsanleitung. NICHT
ABREIBEN, lassen Sie agieren.NIEMALS SCHLEIFMITTEL (Scotch Brite oder Strohwisch), LÖSSUNGSMITTEL oder SÄURE
PRODUKTE BENUTZEN.Nach der Benutzung von irgendwelchem Produkt brauchen wir mit reichlichem Wasser und Seife schnell
ausspülen, damit wir die Reste von Reinigungsmittel herauslösen und das Badzimmer gut lüften können. Dieses Reinigungsmittel
ist zu dem Benutzer oder der Umwelt nicht gefährlich.
2. 2. -¿Welches Reinigungsmittel brauche ich zur Reinigung der Gewohnheitssaubereit?
-¿Welches Reinigungsmittel brauche ich zur Reinigung der Gewohnheitssaubereit?
Zum Gewohnheitssaubereit der Duschtasse wenden Sie einfach einen non scheueren Baumwolllappen mit Wasser an. NIEMALS
SCHLEIFMITTEL (Scotch Brite oder Strohwisch), LÖSSUNGSMITTEL, ALCALI oder SÄURE PRODUKTE BENUTZEN.Falls wir
schwierige Flecken finden, werden wir auf irgendwelche Laden einen "Sauberraster" kaufen müssen.
3. 3.
-¿Welches Produkt brauche ich zum Aufkleben und Verfugen der Duschtassen?
-¿Welches Produkt brauche ich zum Aufkleben und Verfugen der Duschtassen?
Zum Aufkleben werden wir SIKAFLEX (SIKA), SUPERFLEX (KERAKOLL), ULTRABOND (MAPEI) (oder ähnlich) gebrauchen und
zum Verfugen können wir MAPESIL AC (MAPEI) des Fließens oder ein non-saureres Silikon anwenden.
4. 4.
-¿Welche Dicke haben unsere Wandverkleidungen?
-¿Welche Dicke haben unsere Wandverkleidungen?
Die Wandverkleidung ist 6 mm dick.
5. 5.
-¿Gibt es eine Lösung falls die Oberflache von der AKRON Wandverkleidung verdirbt?
-¿Gibt es eine Lösung falls die Oberflache von der AKRON Wandverkleidung verdirbt?
Es ist sehr wichtig, die Wandverkleidung während dem Bauwerk und Anlage zu schützen. Auf jedem Fall wäre es möglich, wegen
verschiede Grunde, dass die Wandverkleidung verdirbt. Wir stellen zur Verfügung die Reparatur Kit mit dem gleichen Farben
und einfach Anwendung, die langes Leben zum Produkt gibt.
11