CYP CM-345S Operation Manual - Page 4
Browse online or download pdf Operation Manual for Media Converter CYP CM-345S. CYP CM-345S 12 pages.
Print Page
Operation Control and Functions
Top Panel
POWER
1
Power button:
1
The unit enters into standby status when 12 V DC power is fed into
the power jack on the back panel . Press the power button to turn
on the unit ( LED illuminates in green color ); press again to return
to standby mode ( LED illuminates in red).
Power ON / Standby indicator:
2
When power button is pressed, the unit is turned on, and the LED
illuminates in green color. The unit is then ready for operation.
When the unit is under standby mode, all control buttons will not
function, Only the PC input is looping through to the VGA output.
Input Selection :
3
Press the button to select between SCART input and PC-loop throught.
When scart input is selected CM-345S will outomatically detect the
SCART input as a RGB signal or composite video signal.
MENU / ENTER :
4
Press the button to enter into OSD menu or to confirm your selection
of the highlighted parameter.
+ / - :
5
When in OSD mode. Press the button to move up or down the hightlight
bar to your desired parameter. Or after a parameter been selected by
MENU/Enter button, press the button to alter the value of your selected
parameter.
3
4
5
Power ON /
Standby LED
2
2
Front
Panel