Ash OMNI 3 Quick Start User Manual

Browse online or download pdf Quick Start User Manual for Microscope Ash OMNI 3. Ash OMNI 3 7 pages.

Print Page
OMNI
3
Quick Start User Guide Rev 3.1
Please remove standard +5 lens before installation of +10 plan1x, +25 or +50 lens.
Also ensure the newly installed lens is selected in System settings and save to Startup
STEP 1: ESD Grounding Cable Assembly (Optional)
Remove the OMNI
1.
Screw the cable as indicated with the M4 screw provided. Ensure that the
cable is pulled upward during assembly.
2.
When screwed in place, bend the cable so that it feeds outward.
3.
Ensure that the bottom ridge
could stop the OMNI
1
STEP 2: Mouse & Keyboard Set-Up
Remove USB dongle from the underside of the mouse.
1.
Ensure mouse is switched to on. Ensure keyboard is switched to on.
2.
3.
Remove USB dongle from the underside of the keyboard located in the
batteries compartment.
Remove yellow "arrow" tab in the keyboard.
4.
2
OMNI
Quick Start User Guide
Settings.
3
Camera Head and all cables from packaging.
*
3
Arm bracket from attaching correctly.
2
1
3
3
under the screw has not been covered as it
3
4
*
2
1 |
P a g e